The WYBOT A1 is a robotic cleaner designed for flat-bottomed pools up to 100 m² in area and 2.7 m deep. It runs for up to 120 minutes on a single charge and collects debris using a dual-filter system.
pandealia.euThe best coupons from Chinese stores, prices and price history in one place.The WYBOT A1 is a robotic cleaner designed for flat-bottomed pools up to 100 m² in area and 2.7 m deep. It runs for up to 120 minutes on a single charge and collects debris using a dual-filter system.
Dimensions and pool suitability
The cleaner measures 345 × 315 × 170 mm and weighs 4.5 kg. Its compact dimensions make it easier to handle and store outside the swimming season. The key limits to check are the pool’s area and depth: the model is rated for up to 100 m² and a maximum depth of 2.7 m. It is designed for pools with flat bottoms.
The stated area is a maximum rating, not a guarantee that the robot will clean the entire pool in a single run under all conditions.
Flow rate and dual filtration
The cleaner has a flow rate of 8.1 m³/h. This is the volume of water passing through the system per hour, not a direct measure of suction power. The WYBOT A1 collects common debris and small leaves from the pool floor.
Its dual-filter system combines a 180 μm filter with an ultrafine cotton layer. The layers capture debris of different sizes, including fine particles. The robot’s debris collection does not replace other pool water care.
Battery and charging
A 2,600 mAh battery provides up to 120 minutes of continuous cleaning. A full charge takes 2.5 hours, so allow time for recharging before the next run. The maximum runtime alone does not guarantee that every pool will be completely cleaned.
Edge cleaning and controls
The WYBOT A1 has an edge-cleaning function: it pauses for a few seconds at the pool wall to spend more time on the area near the edge of the floor. This pause does not, by itself, guarantee that every spot along the edges will be cleaned.
The robot is operated with a single button. LED indicators show battery and operating status and signal when charging or maintenance is needed.
Who is the WYBOT A1 suitable for?
The model is an option for a flat-bottomed pool within its stated area and depth limits. Its strengths include simple controls, dual filtration and a runtime of up to two hours. When deciding whether it is suitable, remember that flow rate is not a measure of suction power and that neither the maximum area nor the runtime guarantees complete coverage under all conditions.
