DrillPro 20 V: Brushless Cordless Blower for Leaves, Grass and Sawdust

The DrillPro Brushless Electric Turbo Blower is a compact cordless blower with a brushless motor, three power modes and a stated air speed of up to 60 m/s. At maximum power, it reaches approximately 25,000 rpm. It is designed for cleaning the garden, workshop and areas around the home.

According to an independent practical review, it can clear grass clippings, sawdust, wood chips and loose debris from walkways. It struggles, however, with material firmly stuck to a surface.

What it can do and where it reaches its limits

The tester found the airflow sufficient for routine household tasks. The blower can be used, for example, to clear grass clippings from a walkway after mowing, dry leaves from paved areas, or sawdust and wood chips in a workshop.

A test with dried mud revealed a practical limit: the air stream could not dislodge it from the surface. Once the mud had been loosened by hand, however, the blower cleared it away. It is therefore not a substitute for a pressure washer or a tool for scraping off stuck-on dirt.

Wet leaves are heavier and can stick to the ground, so clearing them may take longer or require some manual help. For very large amounts of wet leaves or professional cleaning of extensive areas, a larger backpack or petrol blower may be more suitable.

Three modes for different tasks

• First setting: Suitable for gentle cleaning of a workbench, tools or light dust. The lower setting also reduces battery consumption and helps prevent debris from being scattered unnecessarily.
• Second setting: The tester described this as the most versatile mode. It is suitable for grass clippings, dry leaves and dust on walkways.
• Third setting: Delivers maximum power, with a stated speed of approximately 25,000 rpm and air speed of up to 60 m/s. It is intended for larger amounts of leaves, sawdust and other loose debris.

When clearing dust and sawdust, do not direct the air stream at people or animals. Wear eye protection and consider respiratory protection; a lower setting can help reduce the amount of fine dust stirred up in the workshop.

Brushless motor and 20 V battery

Compared with a brushed motor, a brushless motor has fewer parts subject to mechanical wear and can operate more efficiently. Efficiency matters in cordless tools because it affects how the energy stored in the battery is used.

The blower is designed for a 20 V battery system. Before buying, check that the specific battery is compatible and confirm what is included: some variants may contain only the tool body, without a battery. Also check whether a charger is included. If you already own a compatible battery, a body-only version may be a practical choice; compare the prices of the available configurations.

The available materials do not state the runtime, weight or volume of air moved. Air speed alone therefore does not provide a complete picture of performance or how long the blower will run on one charge.

Key specifications

Who is it suitable for?

The DrillPro is suited to regular cleaning around the home and workshop, particularly if you do not want to sweep the walkway after every mow or need to clear sawdust. Its compact cordless design lets you work without a power cable, while the three settings help match the power to the task.

Keep in mind that stuck-on dirt must first be loosened and wet leaves may require more work. Before ordering, check the battery, charger and contents of the chosen variant.