Teendow C6 MAX: Vacuum, Carpet and Steam Cleaner in One

The Teendow C6 MAX combines a vacuum, carpet cleaner and steam cleaner in one device. It uses hot water and steam, allowing carpets, upholstery and suitable hard surfaces to be cleaned without cleaning products.

Three functions for different surfaces

Vacuuming and carpet cleaning are especially useful for carpets and upholstery. Hot water helps loosen dirt from textiles, while suction helps remove it. Steam is useful for cleaning suitable hard surfaces and removing grease.

Before using hot water or steam, check the material manufacturer’s recommendations. Not every surface or fabric can withstand high temperatures and moisture. For sensitive materials, test an inconspicuous area first.

Power and heating

The device has a rated power of 1,650 W and a suction pressure of 12 kPa. The figure in kilopascals describes a pressure difference, not motor power, so it does not by itself determine how well the device will clean a particular surface.

The water heats to above 60 °C, and the steam reaches a temperature above 100 °C. According to the available information, the device is ready to use after a few minutes. Higher temperatures help loosen dirt and grease, but they also call for caution: hot water and steam can cause burns. Do not direct the steam jet at people or animals.

Tanks, weight and dimensions

• Clean water tank: 1,250 ml
• Wastewater tank: 950 ml
• Weight: 5.4 kg
• Dimensions: 375 × 260 × 370 mm
• Power supply: 220–240 V

Separate tanks keep clean water and wastewater apart. During longer cleaning sessions, expect to refill the clean water tank and empty the wastewater tank. After use, empty and clean the tanks according to the instructions. Switch off and unplug the device before maintenance.

The C6 MAX could be a practical choice if you want to vacuum, clean carpets and use steam without several separate devices. When working with hot water and steam, however, always adapt the cleaning method to the surface.