The Smart LED bathroom mirror comes in sizes ranging from 100 × 60 cm to 160 × 80 cm. It offers three light colour temperatures, a Bluetooth speaker, a digital display and a heated demister pad.
The Smart LED bathroom mirror comes in sizes ranging from 100 × 60 cm to 160 × 80 cm. It offers three light colour temperatures, a Bluetooth speaker, a digital display and a heated demister pad.
Sizes and construction
When choosing a size, consider the space above the basin and the width of the bathroom. The smaller 100 × 60 cm size takes up less space, while the 160 × 80 cm version provides a larger mirror surface. The mirror is 5 cm thick, which is worth considering when planning where to install it.
The mirror surface is glass, the rear frame is aluminium and the body is made from silver-coloured polyethylene (PE). The materials and neutral finish suit a range of bathroom styles.
LED lighting and memory
The lighting offers three colour temperatures:
- Warm white: 3,000 K – a softer-looking light for relaxing.
- Neutral white: 4,500 K – suitable for everyday bathroom use.
- White: 6,000 K – a cooler light that may be useful for grooming.
The internal LED strip is up to 4 metres long. Its length alone does not indicate how bright the light is or how evenly it illuminates the face. The lighting memory retains the last setting after the light is switched off, so it does not need to be reset each time.
Demister function
The anti-fog function uses a heated pad to help reduce condensation on the mirror, for example after a shower. Depending on the mirror size, the pad measures from 600 × 200 mm to 1,200 × 350 mm. It is smaller than the full mirror surface, so the entire mirror should not be expected to remain clear.
Bluetooth speaker and display
The Bluetooth speaker has a power output of 5 W and an impedance of 4 Ω. It can connect to a mobile device to play music during your daily routine. The digital display shows the time and other information, allowing you to check the time at the mirror.
Power and installation considerations
The mirror is powered from a standard 230 V mains socket, so there are no batteries to recharge. Before choosing a version, check the available space, the socket location and the dimensions of its heated pad. For bathroom installation, check that the electrical connection and the mirror’s protection rating are suitable for the intended location. Consult a qualified electrician about connection and safety requirements.