Seauto SAT20 Pro: Cordless Robotic Pool Cleaner

The Seauto SAT20 Pro is a cordless robotic pool cleaner designed for pools with an area of up to approximately 200 m² and a depth of 0.5 to 5 metres. Its tracked drive helps it clean the floor, walls and waterline, and it runs for up to 150 minutes on a single charge.

Movement and pool cleaning

The robot needs no hose, float or extension cord during operation. Its tracks allow it to climb the walls to the waterline, where debris can accumulate. It can also handle floor slopes of up to 30°.

Suction pressure reaches up to 45,000 Pa, and the motor is rated at 180 W. The robot collects debris from the floor and walls without the owner having to vacuum them manually. When it finishes cleaning or its battery runs out, it automatically parks by the pool wall, where it can be retrieved.

Filtration and maintenance

The filter basket has a capacity of approximately 2.5 to 3 litres and a filtration rating of 250 microns. Once the robot has been removed from the water, the basket can be taken out from the top for emptying and cleaning before the next use.

Battery and dimensions

The 7,800 mAh battery provides up to 150 minutes of runtime. Charging takes approximately 3 to 4 hours, which is worth allowing for when planning the next cleaning cycle.

The cleaner measures 360 × 330 × 230 mm and weighs 6 kg. There is no hose or power cable to handle when carrying it between pools or storing it. Its IPX8 rating indicates resistance to immersion in water; the device should be used within its specified depth range.

Specifications