The Laresar S7 Pro combines dry vacuuming with wet floor cleaning and delivers up to 19,000 Pa of suction. It offers three cleaning modes, a lay-flat design for reaching under furniture and hot-water brush self-cleaning.
The Laresar S7 Pro combines dry vacuuming with wet floor cleaning and delivers up to 19,000 Pa of suction. It offers three cleaning modes, a lay-flat design for reaching under furniture and hot-water brush self-cleaning.
Wet and dry cleaning
The S7 Pro can vacuum dust and small debris as well as wet-clean floors. It can do both at the same time, so there is no need to use a separate vacuum and mop for routine cleaning. Wet cleaning can also help remove stains and more stubborn dirt from floor surfaces.
The model is intended for a range of floor types, including carpets. Choose the cleaning method according to the surface and the type of dirt.
Suction and battery life
The claimed suction is up to 19,000 Pa. This figure describes the pressure difference created by the vacuum; on its own, it does not determine how effectively the machine removes deeply embedded dirt from a carpet.
The battery consists of six 4,000 mAh cells. The claimed runtime is up to 50 minutes, with coverage of up to 300 m². These are maximum figures, not guaranteed results for every cleaning session. Actual runtime depends, among other things, on the selected mode and conditions of use.
Vac, Smart and Max modes
The vacuum offers three modes to suit different cleaning needs:
- Vac is intended for everyday vacuuming, with more economical and quieter operation.
- Smart can automatically adjust power to suit the situation, so users do not have to keep changing the setting.
- Max uses the highest power for tougher dirt and more thorough cleaning of hard floors or carpets.
When comparing runtimes, bear in mind that maximum power and the maximum claimed runtime may not be available at the same time.
Cleaning under furniture
The 180° lay-flat design allows the vacuum to lie almost flat against the floor. This makes it easier to reach under furniture and into other low spaces. Its ergonomic design also helps with handling during regular cleaning.
Brush self-cleaning and drying
The self-cleaning system uses water at 80°C to remove dirt from the brush. Cleaning is followed by approximately five minutes of drying. These features reduce maintenance effort, although self-cleaning may not completely replace occasional manual inspection and cleaning of the brush.
The Laresar S7 Pro brings vacuuming and wet cleaning together in one appliance. Key considerations are the surfaces being cleaned, the need to reach under furniture, and the difference between maximum claimed figures and performance in a particular mode.