The Z6761 Land Rover Defender 110 is a 1:43-scale RC crawler measuring approximately 10.5 cm long. It has four-wheel drive, proportional throttle and steering, and working LED lights. It is designed primarily for slow driving over small obstacles, such as on an improvised tabletop course.
The Z6761 Land Rover Defender 110 is a 1:43-scale RC crawler measuring approximately 10.5 cm long. It has four-wheel drive, proportional throttle and steering, and working LED lights. It is designed primarily for slow driving over small obstacles, such as on an improvised tabletop course.
The officially licensed model is based on the classic 1993 Land Rover Defender 110. Alongside its driving features, it may also appeal as a small collector’s model.
Small dimensions for indoor driving
The car measures approximately 10.5 × 5.5 × 5.5 cm. Compared with crawlers in 1:10, 1:18 or 1:24 scale, it takes up little space. Books, wooden blocks or other small obstacles are enough to make a course.
Its small wheels and dimensions also limit the size of the obstacles it can tackle. A larger crawler may be better suited to more demanding outdoor driving, although its ability to cross obstacles also depends on its design and the surface.
4WD and proportional control
A small brushed motor drives all four wheels of the Z6761. Its stated top speed is approximately 6 km/h. For a crawler, the ability to drive slowly and precisely matters more: 4WD helps the model negotiate uneven surfaces, although it cannot guarantee that it will clear every obstacle.
Both throttle and steering are fully proportional. Rather than simply switching the throttle on or off or selecting fixed steering positions, the driver can vary the amount of throttle and the angle of the wheels using the controller. This makes fine manoeuvring easier when approaching an obstacle or driving in a tight space.
The controller also offers steering adjustment and two speed settings. The model has working LED lights for driving.
Battery, charging and range
The model uses a 3.7 V, 250 mAh Li-ion battery. The stated driving time is approximately 20 minutes, and charging takes around 60 minutes.
The transmitter operates at 2.4 GHz and has a stated range of approximately 20 to 30 metres, providing plenty of room for a tabletop or indoor course. The controller is powered by two AA batteries.
Z6761 key specifications
| Specification | Value |
|---|---|
| Based on | 1993 Land Rover Defender 110 |
| Scale | 1:43 |
| Dimensions | Approximately 10.5 × 5.5 × 5.5 cm |
| Drive | 4WD, brushed motor |
| Top speed | Approximately 6 km/h |
| Controls | Proportional throttle and steering, two speed settings |
| Lighting | Working LED lights |
| Model battery | Li-ion, 3.7 V / 250 mAh |
| Driving time | Approximately 20 minutes |
| Charging time | Approximately 60 minutes |
| Transmitter and range | 2.4 GHz, approximately 20 to 30 m |
| Controller power | 2 AA batteries |
Who is the Z6761 suitable for?
The licensed body retains the proportions of the classic Defender 110, and the model comes in several colours. It may appeal to Defender fans and collectors who want a small car to display and occasionally drive.
For beginners, the low speed and proportional controls are useful for learning to handle the throttle and steering gently. The Z6761 makes the most sense for someone who wants to drive at home and build small obstacle courses. Its dimensions limit its ability to tackle large off-road obstacles.