The INSE Y50S is a cordless robotic pool cleaner with a 110 W motor and four cleaning modes for the floor, walls, waterline and entire pool. According to the manufacturer, it can run for up to 130 minutes on a single charge.
pandealia.euThe best coupons from Chinese stores, prices and price history in one place.The INSE Y50S is a cordless robotic pool cleaner with a 110 W motor and four cleaning modes for the floor, walls, waterline and entire pool. According to the manufacturer, it can run for up to 130 minutes on a single charge.
Performance, filtration and battery life
A 110 W motor powers the cleaner, and water flows through its filter at a rate of 3,120 GPH, or gallons per hour. This is a flow rate, not a measure of suction pressure. The gallon basis is not specified. Water passes through a filter basket that captures debris and sediment.
The basket is located at the top of the robot and has a capacity of 4 litres. It needs to be cleaned as part of routine maintenance; how often depends on the amount of debris in the pool.
The built-in battery allows the cleaner to operate without a power cable. According to the manufacturer, its maximum runtime is 130 minutes per charge.
Four cleaning modes
The mode can be selected according to the part of the pool that needs cleaning:
- Floor: collects debris and sediment from the bottom.
- Walls: cleans vertical pool surfaces.
- Waterline: targets deposits around the water’s surface.
- Full pool: cleans multiple parts of the pool in one mode.
Two PVC roller brushes help clean surfaces, while anti-slip tracks help the robot move, including along walls. The dedicated waterline mode is particularly useful where debris collects around the water’s surface.
Navigation and conditions of use
The Y50S uses gyroscopes and ultrasonic sensors for systematic navigation. It follows Z- and S-shaped paths to help organise its passes over the cleaning area. This does not guarantee that every spot will be covered in every cycle.
A minimum water depth of 50 centimetres is required to activate the robot. Before use, check the pool depth and select a mode for the area you want to clean.
The robot collects debris from surfaces, but it does not replace other pool maintenance or water treatment.
What’s in the box
The package contains the robot, a charger, a user manual and an operating guide. To start cleaning, charge the device and select the desired mode. The packaging measures approximately 480.5 × 445 × 273 mm, which is useful to know when planning transport or storage.
