DrillPro 8″: A Lightweight Cordless Pruning Saw for Makita 18 V Batteries

The DrillPro 8-Inch Brushless Electric Chainsaw has an approximately 20 cm guide bar, a brushless motor and a battery interface compatible with Makita 18 V batteries. It is intended mainly for pruning trees, cutting smaller branches and lighter garden work. Without a battery, it weighs approximately 1.35 kg.

Its compact size makes it easier to handle, but it is not a substitute for a larger saw when cutting thick trunks or doing professional work all day. Regular checks of chain lubrication and tension are also important.

The bar is about 20 cm long, but the practical cut is smaller

Eight inches is approximately 20 cm, referring to the length of the guide bar. That does not mean the saw is intended for regularly cutting trunks of the same diameter. The stated maximum practical cut is around 150 mm; smaller branches will generally be more comfortable to cut.

Motor, speed and weight

The brushless motor is suited to lighter garden work with a compact cordless saw. Available specifications list a no-load motor speed of approximately 20,000 rpm. Motor speed is not the same as chain speed, however: the chain speed for this model is listed at approximately 5 m/s.

Expect slower cutting in thicker or very hard wood than with a large professional petrol chainsaw. A lower chain speed alone does not guarantee safer operation.

The tool body weighs approximately 1.35 kg without a battery. Adding a battery increases the weight, although the saw remains smaller and lighter than a conventional petrol chainsaw.

Automatic lubrication and chain checks

The saw has an automatic oil system to lubricate the chain. Lubrication reduces friction and helps limit chain overheating and guide bar wear. Before use, check the oil level, chain tension and chain condition in accordance with the manual. Repeat the checks during longer cutting sessions.

According to some user experiences, the chain can loosen during use. Before checking or adjusting it, switch off the saw, remove the battery and wear protective gloves. Adjust the tension according to the manufacturer’s instructions: the chain should not hang below the bar, but it must not be overtightened either. Handle it carefully.

Makita 18 V compatibility and battery choice

The saw uses a battery interface compatible with Makita 18 V batteries. If you already own a suitable battery, a bare-tool option may make sense. However, mechanical connector compatibility alone does not mean the electronic protection is identical to that of a genuine Makita tool. Check the contents of the specific kit before buying.

A smaller 1.5–2 Ah battery reduces weight but provides less runtime. A 4–5 Ah battery lasts longer and may be more practical for cutting a larger number of branches, but adds weight.

Some kits include two chains

A second chain can serve as a sharpened spare, but it is not included in every kit. A sharp chain is important for a smooth cut; a dull chain requires more pressure and makes cutting harder. Check the chain’s condition regularly and follow the instructions when sharpening or replacing it.

Pruning safety

Even a small chainsaw can cause serious injury. Read the manual before use and take the following precautions:

• Wear eye and hearing protection, suitable gloves and sturdy footwear.
• Maintain a stable stance and keep people clear of the area where branches may fall.
• Hold the saw as directed in the manual and be alert to kickback, especially if the tip of the bar contacts wood.
• Remove the battery before cleaning, checking or adjusting the saw.
• Do not cut from a ladder or an unstable position. Leave work at height and hazardous branches to a professional.

Key specifications

Who is it suitable for?

The DrillPro 8″ makes sense as a supplementary saw for a garden or orchard owner who wants to cut smaller branches and values low weight and the option to use suitable Makita 18 V batteries. Check the contents of the chosen kit before buying.

For routine pruning, it offers a compact format and automatic lubrication, but the chain still needs regular attention. A larger saw is more appropriate for thick trunks and all-day professional felling.