This cross-line laser projects up to 16 green lines and self-levels within ±3°. It provides visible horizontal and vertical reference lines for jobs such as hanging shelves, installing frames and tiling walls. The laser marks a reference plane; it does not directly measure distance.
pandealia.euThe best coupons from Chinese stores, prices and price history in one place.This cross-line laser projects up to 16 green lines and self-levels within ±3°. It provides visible horizontal and vertical reference lines for jobs such as hanging shelves, installing frames and tiling walls. The laser marks a reference plane; it does not directly measure distance.
Green lines and stated accuracy
The device uses a green laser with a wavelength of 532 nm. The lines make it easier to align work, although their visibility depends on the lighting and the surface onto which they are projected.
The stated horizontal deviation is ±0.2 mm and the vertical deviation is ±1 mm. Without a reference distance and measurement conditions, these figures are not enough to reliably assess accuracy for a particular job.
Self-levelling works within ±3°. If the surface is tilted beyond that range, reposition the device on a more level base. Before starting work, check that the projected lines are at the intended height and position.
Settings for 4 to 16 lines
The laser lets you select 4, 8, 12 or 16 active lines. A smaller number may be enough for hanging pictures or shelves. For tiling or installing frames, using more lines at once can help you align work across planes and at their intersections.
You can therefore choose the number of active lines to suit the task, whether it is a home improvement project or a trade installation.
Construction and IP54 protection
A 360° swivel joint makes it easier to aim the laser without moving the whole device. Its dimensions of 15 × 8 × 15.5 cm are practical for carrying and storage.
The IP54 rating means limited protection against dust ingress and protection against splashing water. It does not mean the device is dust-tight or protected against immersion, and it does not guarantee that the device cannot be damaged in demanding conditions.
Battery and charging
The laser has an integrated 4,000 mAh battery that is rechargeable and replaceable. The stated runtime is approximately 12 to 16 hours per charge; actual runtime depends on use. Replacing the battery can help you continue working without waiting for it to recharge.
The charger has an EU plug and supports 220–240 V at 50–60 Hz. Check plug and power compatibility for your location.
Safe use
Place the laser on a stable surface and check the position of the projected lines before installation. Do not look directly into the laser beam or point it into anyone else's eyes. The laser class is not specified in the available information, so also follow the markings and instructions on the device.
